Product Name: KXD-48V-90AH Fire Extinguishing Robot Power Lithium Battery Pack Battery Brand: KXD Kaixinda Battery nominal voltage: 48V Battery size / model: KXD-48V-90AH Combination method: KXD ICR18650-25R 3.7v 2500mAh 13S36P Nominal capacity (0.2C5A): 90AH Continuous operating current (A): 80A Peak discharge current (A): 180A Recommended charging current (A): 30A Maximum charging current (A): 50A Battery operating voltage range (V): 54.6V-39V Charge cut-off voltage (V): 54.6V Discharge cut-off voltage (V): 39V Maximum load power (kw) 3kw Charge and discharge port: Charge and discharge at the same end, the charging/discharging interface uses 120A Anderson connector, 16 square lines, with 120A Anderson connector cable 10 squares each 2 lines length 200cm Communication port: . RS-485 communication interface, No. 12 2-core aviation male plug, Pin1-RS-485 A, Pin2-RS-485 B, wiring exposed 60cm, providing communication protocol. RS-232 communication terminal, No. 12 three-core air plug male plug, 1--TX, 2--GND, 3--RX. Battery size (mm): H100mm*W380mm*L630mm (including output port) Battery weight (kg): about 30kg Charging temperature (°C): 0°C~45°C Discharge temperature (°C): -20°C~60°C Storage temperature (°C): -20°C~45°C Battery life: 1000 cycles or more Battery warranty: 12 months Shell material: 1.2mm, sheet metal (surface painting treatment) black Features: long cycle life, light battery weight, high safety performance, green and environmental protection Widely used in: AGV/RGV/MGV automatic trucks, fire-fighting robots, security robots, special robots, low-speed electric vehicles, old scooters, four-wheel electric vehicles, communication equipment, medical equipment, solar street lights, household energy storage, storage Power station, etc.
Charger parameters Charger model: KXD-4830AL smart charger Rated input voltage (V): 220V Voltage input range (V): AC 200-240V Output voltage (V): 54.6V ± 0.5V Output current (A): 30A ± 5% Maximum output power (W): 1638W Efficiency: ≥85% Shell size (mm): L343mm × W175mm × H105mm Charging indication: Power LED1: Red LED2: Green light Charging LED1: Red light LED2: Red light Full of LED1: Red light LED2: Green light Display voltage (V), current (A) Input interface: through IEC standard Power cord (m): 1.5 m long Output line (m): 1.0 m long with 120A Anderson plug connector Net weight (kg): about 6.5kg Shell material: aluminum alloy Battery charging time (h) about 3.5h